RADARPRINT GUIDE

Signing in with a PIN or card

Validate identity mapping and check card reader support for the actual device.

In this guide

Choosing a method

Supported devices offer PIN sign-in and compatible models can use a card reader. Physically connecting a reader does not establish compatibility; test the device, reader and card format together.

Initial verification

  1. Check the test user’s RadarPrint record and print identity.
  2. Configure the authentication method enabled by your organization.
  3. Sign in at the device and check the displayed identity.
  4. Release a held job belonging to that user.
  5. Sign out and verify isolation with a second user.

If a card fails

Check whether the device detects the reader and whether the card is assigned to the correct user. Different readers may transmit card values in different formats. Review mapping with the authorized team without posting raw card values in general support messages.

Safe use

Do not share PINs or leave cards on a device. Disable a lost card using your organization’s procedure. Testing with one shared account does not verify user isolation; use separate accounts in the pilot.